The VERSATECH V100N and V140N, multiple-surface 5-axis double column machining centers, are designed to provide unsurpassed productivity in the machining of very large workpieces thanks to the spindle head that can position to the vertical and horizontal positions and any angle in between.
The machining time for cast iron and non-ferrous material workpieces can be considerably reduced thanks to the fastest cutting feedrate and spindle speed in this machining center class.
In addition, since multiple-surface machining can be realized by just changing the position of the spindlehead by program head by program command, non-cutting time is considerably reduced.
VERSATECH SERIES MAIN CHARACTERISTICS:
- 50 hp, 10,000 rpm Spindle
- Multi-Face Machining
- C-Axis Rotation Continuous for full 5-Axis Machining
- High Speed, High Accuracy, High Rigidity
- Mazatrol Matrix - Standard Equipment
VERSATECH models, ranges and configurations
|
V-100N |
160 |
200 |
240 |
|
Distance between columns |
108.27" |
|
Axis Stroke - X/Y/Z/W |
157.48”/140.73"/
27.95"/49.21" |
196.85”/140.73"/
27.95"/49.21" |
236.22”/140.73"/
27.95"/49.21" |
|
Table Size |
82.68" x 118.11" |
82.68" x 157.48" |
82.68" x 196.85" |
|
Table Load Capacity |
94,797 lbs |
|
Max Spindle Speed |
10,000 rpm |
| Spindle Taper |
No. 50 |
| Rapid Traverse Rate (X-,Y-, and Z-axis) |
1181 IPM |
| Tool Magazine Capacity |
30 Tools (opt. 60, 120 and 240) |
| Spindle Motor(25% ED/Cont. rating) |
50hp / 40hp |
|
V-140N |
280 |
440 |
Distance between columns |
147.64" |
Axis Stroke - X/Y/Z/W |
275.59"/181.10"/27.95"/49.21" |
433.07"/181.10"/27.95"/49.21" |
Table Size |
122.05" x 236.22" |
122.05" x 393.70" |
Table Load Capacity |
94,797 lbs |
Max Spindle Speed |
10,000 rpm |
| Spindle Taper |
No. 50 |
| Rapid Traverse Rate (X-,Y-, and Z-axis) |
1181 IPM |
| Tool Magazine Capacity |
30 Tools (opt. 60, 120 and 240) |
| Spindle Motor(25% ED/Cont. rating) |
50hp / 40hp |
|
VERSATECH SERIES
